Publicité
Introduction..................................................................... 2
Safety............................................................................10
Assembly...................................................................... 18
Operation...................................................................... 28
Maintenance................................................................. 42
Troubleshooting............................................................ 45
Transportation and storage...........................................54
Product description
The product is a power pack unit, a wall saw and a
remote control, Husqvarna Power Pack 8, Wall Saw 8,
Remote control, with an electric motor.
•
The remote control is used to control the connected
power tools.
•
The remote control has a 4.3 in. digital color display.
•
The power pack and the wall saw are kept cool with
water. The remote control controls the electric water
valve.
•
Connect the power pack to a 400/480 V power
supply system with a 32/30 A fuse.
The power pack has embedded connectivity. Refer to
Embedded connectivity on page 2 .
Embedded connectivity
Husqvarna Fleet Services
management solution that gives the fleet manager an
overview of all products that are connected via either
embedded or aftermarket sensors. The sensors record
data like runtime, service intervals, location, and more.
For more information about Husqvarna Fleet Services
download the iOS or Android app Husqvarna Fleet
Services at https://apps.apple.com/se/app/husqvarna-
fleet-services/id1334672726 or https://play.google.com/
store/apps/details?id=com.husqvarna.hfsmobile&hl=en.
Products with embedded connectivity are connected
via the embedded Husqvarna Fleet Services
that have Bluetooth Low Energy (BLE). For more
information regarding how to use it, refer to
embedded connectivity on page 28 . For information
of the BLE technology radio spectrum, refer to
Embedded connectivity on page 57 . For compliance
reservations regarding Husqvarna Fleet Services
Compliance reservations on page 2 .
refer to
Compliance reservations
Note:
Changes or modifications made to this
equipment not expressly approved by may void the FCC
authorization to operate this equipment.
2
Introduction
™
is a cloud asset
™
sensor
To use
™
Contents
Technical data.............................................................. 55
Accessories.................................................................. 61
Service..........................................................................62
Compliance Statements................................................62
Open source................................................................. 63
Registered trademarks................................................. 66
Note:
This device complies with Part 15 of the FCC
Rules and with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
•
this device may not cause harmful interference
•
this device must accept any interference received,
including interference that may cause undesired
operation
Intended use
The power pack is used to operate applicable
Husqvarna electrical power tools with a high frequency
motors.
The wall saw is intended for sawing in hard materials
such as reinforced concrete, stone and brick.
The product is used in commercial operations by
professional operators. Do not use the product for other
tasks.
Note:
™
,
The power pack can also be used together with other
power tools, such as a drill motor and a power cutter. If
you intend to use the power pack when you work with
other power tools than the wall saw, read
•
The sections concerning the power pack in this
manual
•
The operator's manuals for the other power tool
Note:
National regulations can set limit to the
operation of the product.
,
2092 - 003 - 08.08.2024
Publicité
