Publicité
of parts and any other condition that may affect
the machines´s operation. If damaged, have the
machine repaired before use. Many accidents are
caused by poorly maintained machines.
•
Keep cutting machine sharp and clean. Properly
maintained cutting machines with sharp cutting
edges are less likely to bind and are easier to
control.
•
Use the machine, accessories and bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the machine for operations
different from those intended could result in a
hazardous situation.
•
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the machine in unexpected situations.
Service
•
Have your machine serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the machine is
maintained.
•
Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety instructions for wall saws
•
Operate power tool by insulated grasping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
•
Wear ear protectors when diamond sawing.
Exposure to noise can cause hearing loss.
•
If the diamond wheel becomes jammed, stop
applying feed force and turn off the tool. Investigate
and take corrective actions to eliminate the cause of
the diamond wheel jamming.
•
When sawing through the workpiece, ensure to
protect persons and the work area on the other
side. The diamond wheel may protrude through the
workpiece.
•
Ensure that the method of securing the track guiding
system to the workpiece is capable of holding and
restraining the machine during use. If the workpiece
is weak or porous, the anchor(s) may pull out
causing the track guiding system to release from the
workpiece.
General safety instructions
WARNING:
instructions that follow before you use the
product.
2092 - 003 - 08.08.2024
Read the warning
•
This information is never a substitute for professional
skills and experience. If you get into a situation
where you feel unsafe, stop and seek expert
advice. Contact your dealer, service agent or an
experienced user. Do not attempt any task that you
feel unsure of!
•
This product is designed for and intended for sawing
concrete, brick and different stone materials. All
other use is improper.
•
The product must be kept clean. Signs and stickers
must be fully legible.
•
Unauthorized modifications and/or accessories may
lead to serious injury or death to the user or others.
Do not modify this product or use it if it appears to
have been modified by others. Never use a product,
battery or battery charger that is faulty. Carry out
the checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained
and qualified specialists. See instructions under the
heading Maintenance. Only use original spare parts.
•
All types of repairs may only be carried out by
authorized repairmen. This is so that the operators
are not exposed to great risks.
•
Inspection and/or maintenance shall be carried
out with the motor switched off and the plug
disconnected.
General safety instructions
WARNING:
instructions that follow before you use the
product.
•
This information is never a substitute for professional
skills and experience. If you get into a situation
where you feel unsafe, stop and seek expert
advice. Contact your dealer, service agent or an
experienced user. Do not attempt any task that you
feel unsure of!
•
This product is designed for and intended for sawing
concrete, brick and different stone materials. All
other use is improper.
•
The product must be kept clean. Signs and stickers
must be fully legible.
•
Unauthorized modifications and/or accessories may
lead to serious injury or death to the user or others.
Do not modify this product or use it if it appears to
have been modified by others. Never use a product,
battery or battery charger that is faulty. Carry out
the checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained
and qualified specialists. See instructions under the
heading Maintenance. Only use original spare parts.
•
All types of repairs may only be carried out by
authorized repairmen. This is so that the operators
are not exposed to great risks.
Read the warning
13
Publicité
