Publicité
•
Inspection and/or maintenance shall be carried
out with the motor switched off and the plug
disconnected.
•
Cutting, especially when dry cutting, generates
dust that comes from the material being cut,
which frequently contains silica. Silica is a basic
component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Exposure to
excessive amount of such dust can cause:
•
Respiratory disease (affecting your ability to
breath), including chronic bronchitis, silicosis and
pulmonary fibrosis from exposure to silica. These
diseases may be fatal.
•
Skin irritation and rash.
•
Cancer according to NTP and IARC (National
Toxicology Program and International Agency for
Research on Cancer)
•
Take precautionary steps:
•
Avoid inhalation of and skin contact with dust,
mist and fumes.
•
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out microscopic
particles. (See OSHA 29 CFR Part 1910.1200)
•
Wet cut when feasible, to minimize dust.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
•
Read the operator's manual carefully and make sure
that you understand the instructions before using the
product.
•
The product can be a dangerous tool if used
incorrectly or carelessly, which can cause serious or
fatal injury to the operator or others.
•
There is always a risk of shocks from electrical
products. Do not use the product in bad weather
conditions. Prevent that your body touches lightning
conductors and metal objects. Always follow the
instructions in the operator's manual to prevent
damage.
•
All operators shall be trained in the use of the
product. The owner is responsible for ensuring that
the operators receive training.
•
The operator is responsible for accidents or hazards
occurring to other people or their property.
•
Connect the product to grounded outlets only.
•
Make sure that the mains voltage are the same as
the voltage shown on the rating plate of the product.
•
Make sure that the power cord and extension cable
are not damaged and in good condition.
•
Do not use the product if the product or the power
cord is damaged. Let an approved service agent
repair the product or replace the power cord.
14
Read the warning
•
To prevent overheating, do not use the extension
cable while it is folded.
•
Cutting at too high revs can cause damage to the
blade and lead to personal injury.
•
Stop the motor and disconnect the power cord
before you lift or move the product.
•
Do not let children or other persons not trained in the
use of the product to use or service it.
•
Do not let anyone use the product without first
ensuring that they have read and understood the
contents of the operator's manual.
•
Do not use the product if you are tired, if you have
drunk alcohol, or if you are taking medication that
could affect your vision, your judgement or your co-
ordination.
•
Do not operate the product unless you can get aid if
an accident occurs.
•
Make sure that the product stays on a stable
surface.
•
Do not disconnect the power cord unless the motor
is off and fully stopped.
•
Do not go away from the product when the motor is
on.
•
Always disconnect the power supply to the product
for longer work breaks.
•
Always disconnect the power plug before the product
is moved.
•
Always keep fire protection equipment near.
•
Use the handle only to transport the product.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly.
•
Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna service agent.
•
Do not make modifications to safety devices.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment.
•
Regularly do a check of the condition of the personal
protective equipment.
•
Use an approved protective helmet.
Read the warning
Read the warning
2092 - 003 - 08.08.2024
Publicité
