Publicité
a) Connect the water hose to the water connector
outlet on the power pack.
b) Connect the water hose (A) from the power pack
to the inbound water supply connection on the
wall saw.
c) Adjust the flow of water coolant to the wall saw
with the water control valve. Refer to
data on page 55 for water pressure.
2. Connect the power between the power pack and the
wall saw.
2092 - 003 - 08.08.2024
A
Technical
a) Remove the cover (A) on the tool connection
outlet.
A
B
b) Connect the power cable to the outlet for tool
connection (B). If it is necessary, use an adapter.
c) Connect the power cable (A) from the power
pack to the saw unit. Attach the cover lids to
each other to prevent dirt from getting into the
lids.
A
To disassemble the product
If the product has a transport trolley, put all
disassembled parts on the transport trolley.
1. Disconnect the power pack power cord from the wall
socket.
27
Publicité
