Télécharger Imprimer la page

Husqvarna Power Pack 8 Manuel D'utilisation page 45

Publicité

To clean the remote control weekly
Clean the control panel and make sure that you can
clearly read the print.
Clean the battery terminals and the terminals in the
battery compartment and the battery charger. Use a
soft and dry cloth.
To charge the remote control battery
To charge the remote control battery, refer to
and install the remote control battery in the remote
control on page 41 .
To do servicing on the product
Let an approved Husqvarna dealer do the servicing.
Use only original spare parts to keep the safety of
the product.
The timelines for the service message:.
a) When it is >50 h to servicing, the message "Time
for servicing in 100 h" will show.
b) When it is 10-50 h to servicing, the message
"Time for servicing in 50 h" will show.
Explanation of the power pack status
indication lamps
The power pack has a set of status indication lamps,
Status indication lamps on page 34 . The status
refer to
indication lamps help you to do troubleshooting.
The light is on.
The light is off.
The light flashes quickly.
2092 - 003 - 08.08.2024
c) When it is <10 h to servicing, the message "Time
d) When it is 0 h to servicing, the message "Time
If the product has not operated 100 hours after 1
year, let an approved Husqvarna dealer do a check
of the product.
To do after maintenance
To remove
1. Do a test operation after the maintenance is done.
2. If there is a fault, immediately stop the product. Refer
To stop the product on page 33 .
to
Troubleshooting
Error messages on the HMI display
In the bottom bar (A) of the HMI display you can see
active messages or faults. To show the message push
the button adjacent to the quick action with the triangle
symbol (B).
for servicing in 10 h" will show
for servicing" will show
WARNING:
damage. Incorrectly installed remote
control, cables or hoses can have an
unwanted effect on the movements of
the product.
The light flashes slowly.
The light goes from the left side to the
right side and then to the left side again.
The light goes from the left to the right
side.
Risk of injury and
45

Publicité

loading

Ce manuel est également adapté pour:

Wall saw 8Remote control