Publicité
the appliance. If the appliance is not cleaned properly, it will
GB
reduce its lifespan and may result in a dangerous condition
during use.
Manual cleaning
• Clean the cooled exterior and interior surface with a cloth or
sponge slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
• Clean fan with appropriate descaling detergents to ensure
creating limescales.
• Remove door gasket and wash it separately with warm soapy
water, then rinse and dry with soft cloth.
Semi-automatic cleaning
• Apply a suitable detergent to the chamber walls, fan covers
and the inner door glass. Leave for about 20 minutes.
• Set the temperature to about 100-120°C and the humidity
level to position 5. Set the time to 15 minutes.
• After the cycle is finished, open the door and wait for the ap-
pliance to cool down. Rinse with water.
• To dry the chamber, set the cycle to 10 minutes and the tem-
perature to about 180-200°C (repeat the cycle if necessary).
• After cleaning, leave the door slightly open.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
• Special care must be taken when moving or transporting the
machine due to its heavy weight. With at least 2 persons or
using a cart. Move the machine slowly, carefully, and never
incline more than 45°.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
8
Problems
Possible cause
Appliance does
Faulty connection to
not work (all
the power mains.
indicators light
Lack of voltage.
off).
Safety thermal pro-
tection activated.
Cooking cycle
Door open.
set - appliance
does not work.
Door sensor dam-
aged.
Humidity /
Faulty water con-
steam produc-
nection.
tion does not
Closed water valve.
work.
Obstructed water
inlet filter.
Damaged water inlet
solenoid valve.
Door closed.
Gasket mounted not
Steam escape
properly.
through the
Damaged gasket.
gasket.
Handle adjusted
incorrectly.
Non evenly
One of the motor is
cooking.
faulty or operates at
low speed.
The motors do not
reverse direction.
Heating element
faulty.
Internal light
Lamp damaged.
does not work.
Safety thermal
Damaged thermal
protection
protection.
activated contin-
Control thermostat
uously.
damaged.
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose
to your waste equipment by handing it over to a
designated collection point. Failure to follow this
rule may be penalized in accordance with applicable regula-
tions on waste disposal. The separate collection and recycling
of your waste equipment at the time of disposal will help con-
Possible solution
Check connection to
the power mains.
Restore the power
supply voltage.
Restart thermal
protection.
Close the door
properly.
Contact with technical
service.
Check connection to
the water mains.
Open the valve.
Clean the filter.
Contact with technical
service.
Check gasket as-
sembly.
Contact with technical
service.
Contact with technical
service.
Contact with technical
service.
Contact with technical
service.
Contact with technical
service.
Replace the lamp.
Contact with technical
service.
Contact with technical
service.
Publicité
