SilverCrest SMA 500 G1 Mode D'emploi page 43

Operating mode 2
max. 150 ml
Operating mode 3
max. 300 ml
Operating mode 4
max. 150 ml
7.4 MIN and MAX markings
There are three markings indicated inside the canister (5).
•
The MIN marking indicates the minimum fill capacity.
•
The lower MAX marking indicates the maximum fill
capacity when making milk froth.
•
The upper MAX marking indicates the maximum fill
capacity when heating milk.
CAUTION! A program must never be selected at this fill
capacity for making milk froth! It would not be possible to
prevent the milk from overflowing.
7.5 Tips on how to make good milk froth
Please note that the frothing quality depends on the milk used and can vary greatly.
 We recommend using cow's milk. Other types of milk behave differently during the frothing process. This can
result in milk overflowing out of the milk frother.
Warm and creamy froth
Choose this operating mode to create warm, creamy, fine-pored milk
froth.
Heat milk with little froth
Choose this operating mode to heat up milk.
Cold frothing
Choose this operating mode to create cold, creamy milk froth.
SilverCrest SMA 500 G1
English - 41