SilverCrest SMA 500 G1 Mode D'emploi page 42

SilverCrest SMA 500 G1
•
Place the base (10) on a flat, non-slip and dry surface. Make sure that the power cable (11) passes through
the opening on the underside of the base (10). This is to ensure that the milk frother is positioned securely.
WARNING
If the power cable (11) does not pass through the opening on the underside of the base (10),
the base (10) and canister (5) are not positioned securely.
7.1 Functions of the button (7)
The button (7) is used to select the operating mode of the milk frother.
Press the button (7) as many times as necessary for the symbol to indicate the required operating mode (6, 8, 9,
12). If the button (7) is not pressed for approximately three seconds, the flashing LED display (6, 8, 9, 12) turns to
a solid light and the selected operating mode starts.
Once the programme for the selected operating mode is complete, the milk frother will automatically switch off.
The programme length depends on the chosen operating mode and the amount of liquid used.
7.2 Function of the whisk (3)
Please note that the milk may burn if the milk frother is operated without a whisk (3).
Whisk
7.3 Operating modes
The milk frother has four different operating modes.
Select the operating mode that best suits your preference.
Operating mode 1
max. 150 ml
40 - English
Heat up and stir
Firm, warm froth
Choose this operating mode to create warm milk froth with a firm
consistency.