SilverCrest SMA 500 G1 Mode D'emploi page 37

•
Only clean the canister (5) once it has cooled down
completely.
•
Do not fill the canister (5) up beyond the MAX marking on
the inside. If you pour in too much milk, it may boil over,
causing burns and damage to property.
•
Only operate the milk frother with the lid (1) on. Otherwise,
hot milk can escape and cause burns and damage to
property.
•
Do not remove the lid (1) when the milk frother is in use.
•
Clean the inside of the canister (5) with hot water, washing-
up liquid and a soft cloth or the fine side of a washing-up
sponge. You can also clean the canister using a soft
washing-up brush. Soak stubborn milk residue in hot soapy
water before cleaning. Then rinse the canister (5)
thoroughly with clean water to fully remove any detergent
residue.
WARNING – potential damage to property
• Only use the canister
(5)
with the matching base (10).
SilverCrest SMA 500 G1
English - 35