Télécharger Imprimer la page

SilverCrest SMA 500 G1 Mode D'emploi page 47

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 53
8. Maintenance/cleaning
DANGER of electric shock
Always remove the plug from the power socket before beginning to clean the base (10). Otherwise,
there is a risk of electric shock.
Do not pour or spray any liquids onto the base (10) or immerse it into water or any other liquids.
Otherwise, there is a risk of electric shock and a fire hazard due to short circuits.
DANGER of burns
Always fill the canister (5) with tap water first when cleaning the milk frother, as the heating element
may still be hot. Failure to do so may cause burns.
WARNING - potential damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects (such as a metal scourer)
for cleaning purposes. Otherwise the milk frother may be damaged.
Never clean the canister (5) under running water. When cleaning, please make sure that no water
gets into the canister (5) from underneath or through the control panel!
Do not clean the milk frother and its accessories in the dishwasher, as this may cause irreparable
damage.
8.1 Simple cleaning
Leave the whisk (3) in place.
Fill the canister (5) with water considering the MIN and MAX markings and place the lid (1) onto it.
Allow the milk frother to run for around 30 seconds.
Next, rinse the canister (5) with plenty of clean water and rinse the lid (1) under running water.
8.2 Thorough cleaning
Remove the power cable (11) from the power socket.
Remove the whisk (3).
Clean the interior of the canister (5) with warm water and some washing-up liquid. Use a sponge or a soft
cloth. Make sure to remove milk residue in and around the whisk drive shaft. Next, rinse the canister (5) with
plenty of clean water.
Remove the cover seal (2) from the lid (1) and clean the two parts in mild rinse water. Rinse with clean water,
dry both parts thoroughly and position the cover seal (2) back on the lid (1).
Clean the whisk (3) in mild rinse water and rinse it with clear water.
Next, rinse the canister (5) with plenty of clean water and rinse the lid (1) under running water.
SilverCrest SMA 500 G1
English - 45

Publicité

loading

Ce manuel est également adapté pour:

428354 2301