Publicité
Les langues disponibles
Les langues disponibles
HANDLING AND INSTALLATION
RECOMMENDATIONS FOR HANDLING
AND INSTALLATION
IMPORTANT _________________________
When handling and installing the appliance
comply with the information provided by the
manufacturer directly on the packaging, on
the appliance and in the instructions for use.
If necessary, the person authorized to
perform these operations must develop a
"safety plan" to protect the people directly
involved.
PACKAGING AND UNPACKING
Packaging is designed to reduce space and as
appropriate to the type of transport used.
To simplify transport, some components may be
removed and suitably protected and packed for
transport.
The packaging carries all information necessary for
loading and unloading.
When unpacking, check that all components are
provided in the correct quantities and undamaged.
Packaging material must be properly disposed
of in accordance with all local recycling rules and
regulations.
TRANSPORT
Different means of transport may be used, depending
on the destination.
The chart below shows the most commonly used
alternatives.
During transport, secure the package(s) properly to
prevent unwanted shifting.
HANDLING AND LIFTING
The appliance can be handled using fork-lift or hook
equipment of suitable load-carrying capacity. Before
lifting, check the position of the load's center of
gravity.
IMPORTANT _________________________
When engaging with the lifting equipment,
note the location of all intake and outlet
pipes.
Combination Oven Installation and Operation Manual
Section 4
Handling and Installation
17
Publicité
