Panasonic SV-4100 Mode D'emploi page 6

Connections
Rear Panel ANALOG IN terminals
These are balanced analog audio XLR input connectors.
ANALOG OUT terminals
These are balanced analog audio XLR output connectors.
OUTPUT LEVEL selector (+4 dBu/—10 dBu)
Select the nominal output level (nominal level
for a peak level meter display of -18 dB).
AES/EBU terminals (IN/OUT)
These terminals are for input or output
of signals for the professional digital interface.
AC IN jack
Connect to the grounded AC outlet
with the included AC power supply cord.
IEC (IEC 958 for consumer use) optical terminals (IN/OUT)
These terminals are for input or output of digital signals
from/to a consumer unit by using the optical cable.
TEC (IEC 958 for consumer use) coaxial jacks (IN/OUT)
These terminals are for input or output of digital signals from/to a
consumer unit by using the coaxial cable.
WORD SYNC terminal for external
synchronization
See page E-39.
VIDEO SYNC terminal for external
synchronization
See page E-39.
REMOTE CONTROL jack (PARALLEL)
See page E-7.
input connector Output connector
GND
- (Cold)
GPI input terminal (PLAY/PAUSE)
See page E-8.
When making digital IN/OUT connections