Panasonic SV-4100 Mode D'emploi page 33

A-Time Search
Description of A-Time Search
There are two search methods depending on how the tape position is designated.
1) Setting the A-Time directly and searching (A-Time search):
This method comes in handy when the A-Time to be searched is known.
2) Searching with the A-Time already stored into a LOCATE button (locate search):
Four A-Time positions can be stored into the four LOCATE buttons (No.1 to No.4), and the corresponding tape
position searched by pressing the appropriate button. A-Time that have been stored can also be reset. The
A-Time stored in the LOCATE buttons are retained even when the power is turned off.
Method of Operation
Placing the unit in the quick start mode
Directly setting the A-Time of the search destination
No. Action taken Operation
gram Play mode).
2 Press the SETTING (forward/re-
When the button is pressed, the value of the flashing digit is
verse) button.
incremented or decremented by 1; when the button is kept depressed,
or the value is continuously incremented or decremented.
Press the program number button The value is entered into the digits now flashing on the display.
on the remote control transmitter
(Continued)
E-3¢