Panasonic SV-4100 Mode D'emploi page 32

E-32
Quick Start Function
Using trim mode for editing functions
The trim mode settings can be used not only for quick start but for A-time search, high-precision post-recording
editing and simple assemble editing. The procedures for accessing these functions are described below.
No. Transfer Button operated Action taken Displays Reference
destination mode page
1 A-Time search LOCATE The unit searches for the A-time E-33
mode button which was previously stored in
one of the LOCATE button.
2 High-precision STARTIDor The unit is placed in the high- The quick start E-36
post-recording ed- SKIP ID button precision post-recording editing indicator stops
iting mode +ID WRITE mode, and the ID is entered pre- flashing and
button cisely at the playback start posi- _ lights.
tion which was set in the trim
mode.
3 Simple assemble REC button The data before and after the play- E-37
editing mode back start position which was set
in the trim mode is stored in the
RAM, and the unit is placed in the
simple assemble editing trim
mode.
In mode 2 above, press the ID WRITE button after the sub code to be entered has been selected (by pressing the
START ID or SKIP ID button to start the ID indicator flashing).