Panasonic SV-4100 Mode D'emploi page 47

System Display Mode Selection
Re-initializing all stored data settings
Press the EXT SYNC + TIME INPUT + COUNTER RESET buttons simultaneously.
List of settings which are retained even when the power is turned off
Selecting the digital input/output terminals e@ IEC-C
Selecting the digital output terminals mode @ 1 AA
Setting the single play mode @ OFF
Setting the program play blank skip mode @ ON
Selecting the main ID6 to be recorded @ 1D6=00
Setting the monitor output attenuate level r —0 dB
Setting the quick start play mode — OFF
Setting the PNO/START ID AUTO mode _ ON
Setting the SKIP PLAY CANCEL mode _— ON
Selecting the external sync mode —_ Internal
Setting the A-Time in the LOCATE button —_ 0
If "EEEEE" appears for 1 second on the counter display when the power has been turned on:
This indicates that the data back-up function described above is not working properly.