Publicité
Les langues disponibles
Les langues disponibles
A-Time Search
ERLE
LAAN
LE
RO
a
I LE SET EE
SE
TE
ET
NT AE ETT ER
TEE IE LE TT OTN ETE TER TTD
ETE LEER TEE
EEE
IL I RE OTE TNE
TITIES
Storing Absolute Time in the LOCATE memories
(1) Entering the A-Time
Operation mode
Action taken
Operation
1) After setting all the digits in the time
Keep
one
of the
The LOCATE button number appears on
setting mode following
the procedure
LOCATE
buttons
the program number display ("A1" for
for A-Time setting
(1 to 4) depressed
LOCATE1, "A2" for LOCATE2, etc.), and
(for at least 1.5 0rso
the A-Time displayed at that moment is
2) After setting the tape position in the _ sec.).
stored in RAM with the corresponding num-
quick play or simple assemble editing
ber.
trim mode
During operation
in any mode other than
The A-Time at the present tape position is
the time setting mode with the absolute
stored.
time recorded on the tape and the QUICK
START button set to the ON position.
(2) Checking or correcting the entered time values
Press the QUICK START button to light the indicator.
Press the TIME INPUT button while in STOP to enter time setting mode.
Press any of the LOCATE buttons 1-4 for a short duration (less than 1.5 seconds).
Absolute Time stored in RAM appears on the display. The displayed A-Time can be corrected using the same
method as for A-Time setting, and then re-entered using the above method.
(3) A-Time set in the LOCATE LAST button
When the TIME INPUT button has been pressed to enter the time setting mode, the A-Time that appears first
is the code stored in the LOCATE LAST button. In the following cases, the latest A-Time is always entered in
the LOCATE LAST button:
¢ When the deck has been placed in the quick start trim mode
¢ When an A-Time has been entered in a LOCATE button
¢ When an A-Time has been changed in the time setting mode
Direct search using the LOCATE buttons (Locate Search)
Reminder:
In any mode except A-Time stored, press one of the LOCATE buttons (1 to 4 or LAST) for a short duration (less
than 1 sec.).
Pause search of the A-Time stored in the button pressed is now commenced.
The quick start indicator must be lit to use Locate Search.
To release the A-Time search mode:
Press the STOP button. The quick start indicator stops flashing and lights, and the regular counter indication is
restored on the display.
E-35
Publicité
