Panasonic SV-4100 Mode D'emploi page 44

E-44
System Display Mode Selection
Selecting the main ID6 display (mode No.5)
(1) SCMS
(2) Setting the main ID6
What is displayed Actual Significance
display (When using consumer- type DAT recorder)
ee SS EE ee
The two digits on the left show the value 1) 00 D6 value set to 00: Copy-free. Unlimited digital copies
of main ID6 that are user-selectable and can be made from the source tape or its copies.
will be recorded onto tape when using
the analog inputs or the AES/EBU Digi- 2) 11 ID6 value set to 11: Copy-restricted. Digital copies can be
tal Input terminal. The two digits on the made from the source tape with this code, but the copies
right show the actual main ID6 value cannot be duplicated digitally.
recorded on the tape.
3) 10 ID6 value set to 10: Copy-prohibited. Digital copies can-
not be made using a consumer type DAT Recorder.
Display example: When "11P00" is displayed
The first two digits denote the value of main ID6 which is
"user-selectable bits" and to be recorded onto the tape during recording.
In this case, these digits are "11."
The last two digits denote the value of main ID6 which has been recorded
onto the tape being played back. In this case, these digits are "00."
To change the setting: