Panasonic SV-4100 Mode D'emploi page 50

Quick Reference for Quick Start Mode Operations
Operations of Quick Start Function
: : Reference
Procedure AZ EVeem oeetaatenat Button Operated Page
1. Setting the quick start mode Set the QUICK START button to ON. E-28
2. Entering the quick start Current tape position ak button during E27
position
Ti Refer to "Operations of A-Time &
Slime & Look scares Locate Search" described below.
Start ID search ae el idee Start ID using E-29
Input the PNO using the program E-29
Program number search number buttons on the remote
control transmitter and then press
the STANDBY button.
, Ghose ; Adjust the position using the E-30
3. Finely adjusting the quick SETTING buttons or SEFTING dial.
start position
4, Checking the quick start One-time rehearsal playback ) Ptess the REHEARSAL button for a E-31
position short duration.
Repeat rehearsal playback pal hare einer yori E31
5. Beginning quick start playback Press the PLAY button. E-31
Operations of A-Time & Locate Search
:
.
Reference
Procedure Main Functions Button Operated Page
1. Setting the quick start mode Set the QUICK START button to ON. E-33
Press the TIME INPUT button to enter E-33
2. Directly setting the A-Time
of the search destination
Various method of
entering the A-Time
the time setting mode.
e Press the SETTING (forward/
reverse) button.
e Turn the SETTING (UP/DOWN)
dial.
¢ Press the program number button on
the remote control transmitter.
h i n g the digi Press the TIME MODE SELECT (FF or E-34
couaniging the digit to Re set REW) button or the MEMORY button on
3. Startine the A-Ti h the remote control transmitter.
. ing
the A-Time searc
Play search
Press the PLAY button.
E-34
7 Eee (Before starting the A-Time search) E-35
4. Entering A-Time into the Keep one of the LOCATE buttons (1 to
LOCATE buttons 4) depressed (for at least 1.5 or so sec.).
5. Direct search using the Press one of the LOCATE button qd to E-35
LOCATE buttons 4) for a short duration (less than 1 sec.).
Operations of External Sync Function
Reference
Procedure Button Operated Page
Press the EXT SYNC button, then E-39
1. Setting the external sync press the EXT SYNC button repeat-
edly within approx. 3 seconds to
scroll through the settings.
mode
E-50