Panasonic SV-4100 Mode D'emploi page 14

E-14
Playback Functions provided by the Recorder
Skipping Programs (Skip Play)
Notes:
This function cues to the next tape position where a Start ID has been recorded.
¢ This function may not operate correctly in the case of very short audio segments (about 30 sec. or less).
* This function is different from Auto Skip Play Function in indexing. (Refer to pages E-23 and E-26.)
Skip forward or backward (Forward or Reverse Skip Play)
Note:
Note:
(1) Setting the skip number
In the playback, standby or stop mode, press the forward or reverse SKIP button.
When the button is pressed, the skip number is incremented or decremented by 1; whenitis kept depressed more
than 1 sec., the number is continuously incremented or decremented (up to +99).
Press the forward or reverse SKIP button so that the number of programs you want to skip are displayed in the
program number display panel. The number of times the button is pressed is indicated witha plus "+" ora minus
aw sign.
During reverse skip, the segment now being played is counted as one skip.
(2) Starting skip search
Skip search is started after the skip number setting is entered.
Action taken Operation
1) Donot press the SKIP button within 2 secondsafter Search is commenced automatically.
the skip number was set.
(In the playback mode, playback is started after the
search, and in the other mode, the pause mode is
established after the search.)
The PLAY or STANDBY button may by be pressed even during search operation to select either mode upon
completion of the search.
During skip search, changing the skip number is not possible.
Skip during program play
After the program sequence has been memorized and the reverse SKIP button is pressed while acertain selection
is being played, the tape goes back to the beginning of the current selection. If the button is pressed again, the
'tape goes back to the beginning of the previous selection.
Identifying the Contents of Each Program Recorded on the Tape (Music Scan Play)
Note:
Press MUSIC SCAN button.
Ifa desired audio segmentis found during scanning, press the PLAY button to continue playback. When the unit
is changed to the playback mode, the play indicator will illuminate.
To interrupt the scan, press the STOP button.
Music scan does not function during program play.