Panasonic SV-4100 Mode D'emploi page 41

System Display Mode Selection
System Display Mode
(1) Entering the system display mode
Deck is set to the digital input/output terminal selection mode (mode No.0) of system display mode.
"0-" appears on the program number display.
(2) Selecting the display mode
Press the COUNTER MODE button.
Each time the button is pressed, the display mode changes in the order of the mode number.
The mode No. of the selected display mode is displayed.
(3) Returning to the regular display (releasing the system display mode)
Press the COUNTER RESET button.
Selecting the system display mode:
Mode No. 0 = Digital input/output Mode No. 1 = Digital output
and optical terminals.
Mode Displays and Their Setting Methods
Selecting the digital input/output terminals (mode No.0)
What is displayed Actual display Significance
The currently selected terminals appear on the 1) IEC-C "Coaxial terminals" selected.
counter display.
7
2) TEC-0
"Optical terminals" selected.
3) AES "XLR-3 terminals" selected.
To change the setting:
Press the SETTING button (forward). The display changes in the sequence of 1) through 3) above, thus changing
the terminals selected. The setting established after initialization is "IEC-C".
E-4: