2
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions for
the safe, proper and economic operation of the product,
for avoiding danger, for minimising repair costs and
downtimes and for increasing the reliability and extend-
ing the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the power tool
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed with
respect to the associated hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and the safe-
ty instructions.
3
Product description (Fig. 1-28)
1.
Steering
2.
Drive bow
3.
Engine brake lever
4.
Electric starter
5.
Upper push bar
6.
Electric starter unit
7.
Quick clamp lever
8.
Star grip nut
9.
Lower push bar
10.
Cable clip
11.
Guide for push bar
12.
Fuel filler cap
13.
Fuel tank
14.
Air filter cover
14a. Air filter
15.
Water connection
16.
Idler
17.
Spark plug connector
17a. Spark plug
18.
Exhaust pipe
19.
Oil dipstick
20.
Side discharge flap
20a. Side discharge
21.
Cutting height adjustment
22.
Drive wheel
23.
Discharge flap
24.
Grass collection basket
24a. Grass collection basket fill level indicator
25.
Rope hook
26.
Pull starter
27.
Mulching insert
28.
Battery
28a. Battery unlocking lever
28b. Battery charge status indicator
28c. Button for battery charge status indicator
29.
Battery charger
30.
Blade
31.
Blade screw
32.
Washer
33.
Engine spindle
34.
Carburettor screw
35.
V-belt
4
Scope of delivery (Fig. 1-2)
Item Quantity Designation
5
1 x
Petrol lawnmower with upper push bar
7
2 x
Quick clamp lever
8
4 x
Star grip nut
9
1 x
Lower push bar
10
1 x
Cable clip
11
2 x
Guide for push bar
20 a 1 x
Side discharge
24
1 x
Grass collection basket
27
1 x
Mulching insert
28
1 x
Battery
29
1 x
Battery charger
A
2 x
Screw M8
GB / IE / NI / CY / MT
|
3