First Start Up - Palazzetti IDRO INSERTION Manuel D'installation, D'utilisation Et D'entretien

9.2 First start up

During the first ignition of the appli-
ance, make sure the rooms are prop-
erly ventilated as unpleasant odours
or fumes may be generated due to the
evaporation or drying of certain mate-
rials used. This phenomenon will grad-
ually disappear.
Connect the appliance to the mains, operate the
power switch on the back of the appliance by
turning it to "I".
If the connection is correct, the appliance emits
a series of intermittent noises and the display
lights up.
See the display manual.
84
Fig. 35
004778730 - 24/06/2021