First Start Up - Palazzetti ECOFIRE TWIGGY Notice D'installation Et D'entretien

7.3 First start up

Connect the appliance to the mains, operate the
power switch on the back of the appliance by
turning it to "I".
If the connection is correct, the appliance emits
a series of intermittent noises and the display
lights up.
Make sure not to touch the control
panel when powering the appliance.
To correctly configure the stove, refer
to the "Initial settings" paragraph in
the annexed Use and functionality
manual.
004771070 - 17/11/2020
ITALIANO ENGLISH
Fig. 32
DEUTSCH FRANÇAIS ESPAÑOL
55