Palazzetti IDRO INSERTION Manuel D'installation, D'utilisation Et D'entretien page 72

A
INSERTING THE STOVE
To insert the stove, proceed in reverse order:
• lift the sliding release lever (B);
• push the stove into its seat until it is certain that
the automatic locking system is active;
• reposition the safety bracket (A), securing it
with the two screws;
• close the door.
The power supply will be restored by
the safety micro switch.
72
5.1.5 Positioning the generator without
pedestal
Once the pallet has been removed (refer to the
paragraph "5 HANDLING AND TRANSPORTA-
TION" on page 65) proceed as follows:
• Open the door;
• remove the safety bracket by loosening the two
retaining screws (A - Fig. 18);
• lift the sliding release lever (B - Fig. 18) and ex-
tract the machine;
• disconnect the water delivery and return pipes
(refer to the paragraph "4.1 Description" on
page 58);
• support the stove with the aid of a metal bar
(1/2'' length 2 meters) to be inserted in the ap-
propriate pass-through element (A) located
behind the boiler (Fig. 19);
• Loosen the 4 screws (B) that lock the stove
on the sliding guides and separate it from
the latter (Fig. 19);
B
Fig. 18
B
B
A
Fig. 19
004778730 - 24/06/2021