Initialconfiguration - Palazzetti IDRO INSERTION Manuel D'installation, D'utilisation Et D'entretien

8

INITIALCONFIGURATION

Depending on the type of installation, the stove must be set according to the most correct configu-
ration for its operation.
Before proceeding, the stove must be powered.
Use the arrow keys to move between the icons until reaching the set-up menu
a) Use the arrow keys
b) Select the password
c) Scroll with the keys
d) Press the key and enter the value
e) Press to confirm;
f) The configuration currently in use will be displayed;
g) To modify, press the
h) Press to confirm.
After changing the configuration, a communication error message may appear for a few
seconds. Ignore it and switch the stove off with the safety switch on the back, wait a few
seconds and switch it on again.
It is possible to choose from four different configurations:
Description
External thermostat
Room probe (default)
Storage tank with coil
Storage tank without coil
004778730 - 24/06/2021
to go to the set-up menu
"7"
with the key and confirm with the key
and select the submenu
"54"
with the keys
key and enter the value of the new configuration with the keys
ITALIANO ENGLISH
and press the key
;
[30] " --0"
; will flash;
;
Configuration
1
2
3
4
FRANÇAIS
;
;
;
77