Palazzetti IDRO INSERTION Manuel D'installation, D'utilisation Et D'entretien page 89

• Proceed in reverse order to reset the appliance.
10.5.5 Feed cleaning
In case the feed pipe that takes the pellets from
the hopper to the combustion chamber gets
clogged, proceed as follows:
• Remove the protective grille inside the hopper
by unscrewing the four Phillips screws with a
screwdriver;
• Remove the inspection plate stop.
• Remove the inspection plate.
• Remove the pellet residues inside the feed pipe
using a screwdriver.
004778730 - 24/06/2021
ITALIANO
The cleaning operation must only be performed
Fig. 40
by qualified personnel.
10.5.6 Cleaning the smoke exhaust duct
It must be carried out at least twice a year, at
the beginning and in the middle of the winter
season, and in any case whenever necessary.
Fig. 41
If there are horizontal sections, it is necessary to
check and remove any deposits of ash and soot
before they obstruct the passage of fumes.
ENGLISH FRANÇAIS
Fig. 42
Fig. 43
89