Configuration 4 - Storage Tank Without Serpentine - Palazzetti IDRO INSERTION Manuel D'installation, D'utilisation Et D'entretien

8.4 Configuration 4 - Storage tank without serpentine

8
1
8
Set configuration 4 when you intend to con-
nect the appliance to a storage tank without
serpentine.
The appliance turns on according to the temper-
ature read by the storage tank probe, and turns
off based on the stufa return temperature.
The antifreeze function can also be set in this
configuration.
82
T
1
5.1.13 Storage tank without serpentine
electrical connection
In this case simply move the room temperature
probe on the appliance and extend it to place it
in the probe seat, found on the storage tank (Fig.
32).
Storage tank probe
1
8
It is important to check that the appli-
ance is set to Configuration 4.
Fig. 32
004778730 - 24/06/2021