cybelec DNC 1200 Informations Techniques page 31

.
•
MAINTENANCE
The maíntenance of the numerícal control ís límited to regularly changing the
fıltcrs and cleaníng the exterior.
Changing the fílters
It ís ímportant to change regularly (once a month) the fılters іп the numerical
control ventílators. If thís maíntenance is neglected, the numeńcal control can
oуeг heat and provoke mísfunctíonníng whích may be íгreversíble.
• Cut the main power śupply.
•
Unscrew the 4 screws on the protectíon gri11.
• Change the fılter.
•
Replace the protectíon gri11.
Cleaning the DNC
• Cut the power supply
• Clean the keyboard, the casíng and the rear panel wíth a damp cloth
and liquíd soap (this is what ís best !).
Dry wíth a c1ean dry cloth.
Never use alcohol based products, or solvents,
(tríchlorethylene, thínner, acetone, benzene, etc.).
PAGE 23