Publicité
Les langues disponibles
Les langues disponibles
1 wíre 0,75 mm2
for
each supply termínal
of the DNC.
Wíres wíth a
suffıcíent sectíon
comíng from the
24VDC supply.
+ 24 VDC (24V)
0n1y one línk to the mass for each
supply voltage.
The sectíon of thís conductor must be
at least equal to the total of the
sectíons connected to the supply.
Wago connectors of
the DNC.
.
Shíelded supply cable 2 x
0.75 mm2 (24 VDC).
One 0,75 mm2 conductor for
each supply termínal of the
DNC.
Shíelded cable 6, 8, 16 or 21 x 0.34 mm2
dependíng on the connector attached.
• The OV of the analogíc supply voltages must be connected separately
to each peńpheral concerned in the same way as the "hot" wire of the
analogíc voltage ís connected.
Thís OV must not be connected to the earth .
Remínder:
A supply cable must not be ínterrupted.
It must be connected directly to the perípheral concerned.
The supply cables must be placed ín separate conduíts and as far away
as possíble from the other voltages.
The earthing of the shíeld ís realízed as near as possíble to íts
destínation.
PAGE 12
BASIC TECHNICAL INFORMATION
Publicité
