cybelec DNC 1200 Informations Techniques page 28

• Figure 6 represents the bunch of cables placed ín the fıxíng clamp and
the earthíng of the shíelds. This operatíon ís absolutely necessary to
ínsure correct functioníng of the DNC.
For the DNC 80 / 800 and 900
the cable holding clamp must be
placed on the insulation.
Connect the earth
braíd (min 20 mm2)
to the terminal
provided for ít.
Fig. 6
•
•
PAGE 20
BASIC TECHNICAL INFORMATION