Coltene SciCan BRAVO G4 Manuel D'utilisation page 97

21. PRINTER CONNECTION
Connect the printer to the RS232 serial port located on the
rear of the autoclave (see figure).
Load the desired type of paper and turn on the printer.
Set the type of paper loaded (see the paragraph PRINT
MANAGEMENT).
Only the optional external printer Ref. M7D200012 is compatible with the BRAVO G4.
Refer to the printer manual for printer starting and paper loading.
22. APPENDIX - SPARE PARTS AND ACCESSORIES
Only use spare parts and accessories that meet the manufacturer's specifications.
DESCRIPTION
Bacteriological Filter
Door Gasket (17/22 L)
Chamber Drain Filter
23. APPENDIX - TECHNICAL SERVICE
FOR ANY REQUEST FOR TECHNICAL INTERVENTION ON THE PRODUCT,
BOTH UNDER WARRANTY AND OUT OF WARRANTY, DIRECTLY CONTACT
THE DEALER OR RESELLER THAT SUPPLIED THE AUTOCLAVE.
We will gladly provide any information you may need on the product as well as give you suggestions and advice on the
steam sterilization procedures.
In this regard, please refer to the following address:
Head Office:
SciCan Ltd.
1440 Don Mills Rd. Toronto, ON, Canada, M3B 3P9
T +1 416 445 1600
TF +1 800 667 7733
customerservice@scican.com
www.scican.com
24. APPENDIX - WARNINGS AND LOCAL REGULATIONS
Before carrying out any technical service operations, consult the Technical Service Manual containing
the above instructions.
CODE
97290160
97400145
97290210
93