Coltene SciCan BRAVO G4 Manuel D'utilisation page 46

10.4 H2O TEST
Select this option to test the water quality.
The water conductivity is automatically measured at each sterilization
or test cycle start and the relative value is indicated in the cycle report.
10.5 DOOR OPENING
1.
To open the autoclave door, press and hold the
button shown in the figure.
2.
The door opens and stays ajar.
3.
Now you can manually open the door.
Keep the door closed, while not running the sterilization cycle, in order to ensure preheating achieves the max temperature level.
42