Coltene SciCan BRAVO G4 Manuel D'utilisation page 95

Remove the plastic cap from the front door cover, forcing slightly
on the groove. Cap removal allows access to the worm shaft,
part of the door locking system.
Using the 5mm Allen key (included with BRAVO G4 standard equipment)
release the door locking system as following:
1.
Insert the 5mm Allen key on the hexagonal seat, at
the head of the worm shaft.
2.
Rotate clockwise until releasing the door locking
system.
3.
Open the door and remove the load.
NOTE: The load MUST BE considered as NON-STERILE.
91