Coltene SciCan BRAVO G4 Manuel D'utilisation page 41

8.3 EXECUTION OF THE CYCLE
Taking as an example the most complete and significant sterilization cycle, i.e. the B 132°C HOLLOW WRAPPED program,
characterized by fractionated pre-vacuum, the cycle sequence is as follows:
1.
Warming Up
2.
First Vacuum Phase
3.
First Pressure Rise
4.
Second Vacuum Phase
5.
Second Pressure Rise
6.
Third Vacuum Phase
7.
Third Pressure Rise
8.
Sterilization
9.
Steam Discharge
10.
Drying
11.
Ventilation
12.
Cycle Completion
8.4 CYCLE OUTCOME
At the end of the cycle it is important to check the
sterilization process outcome.
If the message "COMPLETED" is displayed, it means that
the cycle has completed correctly without any alarm
interruptions and that complete asepsis of the material is
guaranteed.
8.5 DOOR OPENING AT THE END OF THE CYCLE
To open the sterilizer door, press the DOOR UNLOCK
button shown in the figure:
37