Coltene SciCan BRAVO G4 Manuel D'utilisation page 54

12.4 ETHERNET
1.
Select ETHERNET to connect the sterilizer to a local
Ethernet network.
2.
DHCP can be set as Automatic or Manual.
In Automatic DHCP mode, the network
configuration parameters are automatically
assigned.
In Manual DHCP mode, the network configuration
parameters must be set manually.
Confirm the selected mode by pressing ENTER.
12.5 G4 CLOUD
1.
The BRAVO G4 Cloud web portal is a direct
connection to the BRAVO G4 on your local area
network. It is protected by your firewall and not
accessible to outside users (unless they have a
Remote Access Code).
For more information, please contact the Technical
Service Department for retrieving Remote Access
Code.
The G4 Cloud web portal provides real-time cycle
information and archived sterilization records
unique to this unit. From here, you can print reports,
set up email notifications and search cycle histories.
To set up the web portal, please follow the below
instructions; additional information is available on
the portal's 'HELP' tab.
2.
Once network connection is complete, select
the Cloud icon to setup SciCan Online Access.
The Online Activation Code or QR Code will
automatically display on the screen.
Using the Online Access Activation Code, please
follow the instructions listed on
www.scican.com/online-access or use the QR-
Code for faster URL access.
Online Access can be completed at any time
(the unit must be connected to WiFi or Ethernet
network).
50