Coltene SciCan BRAVO G4 Manuel D'utilisation page 29

USERS
The users list can be edited with 30 users max.
Press USERS button to enter the menu.
When using the device for the first time create the ADMIN
user (identified by *) following the steps outlined below.
Fill in the fields inserting ADMIN user name and PIN.
Press ENTER to confirm.
The first user entered is given administrator rights.
If the user enters the pin incorrectly 3 times, it is necessary to use the
unlocking procedure described in APPENDIX - USER PIN RESET.
After you have entered the PIN, you can access the
reserved administrator menu.
The ADMIN user can decide whether the sterilizer will ask
for the generic user PIN at the cycle start (PIN Start) and/or
at the end of the cycle (PIN End).
It is possible to activate either one of the two options or
both.
By activating "PIN Start" the system requests the user to
enter the PIN when the sterilization cycle starts.
By activating "PIN End" the system requires the user to
enter the PIN at the end of the cycle before unlocking the
door.
If PIN request is set at cycle start, press START to select the
user and the relevant PIN.
Once the PIN is confirmed, the cycle starts automatically.
To create a new user, press the "+ User" button.
Fill in the fields inserting user name and PIN.
Press ENTER to confirm.
25