Mectron starlight uno Mode D'emploi Et D'entretien page 34

starlight uno
Transport and storage conditions
Altitude
Weights and dimensions
Table 7 – technical Specifications
a) l = width; L = length; H = height
11.1 Electromagnetic Compatibility IEC/EN 60601-1-2
WARNING: Portable and mobile radio communication appliances may affect the correct
functioning of the device.
WARNING: the device requires specific EMC precautions and must be installed and
started up in accordance with the EMC information given in this chapter.
WARNING: the use of cables and accessories not supplied by MECtRON, may adversely
affect the EMC performances.
11.1.1 Guidance and Manufacturer's Declaration - Electromagnetic
Emissions
the device is designed to operate in the electromagnetic environment specified below. the
customer or the user of the device should ensure that it is used in such environment.
Emissions Test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Emissions of fluctuations
voltage/flicker
IEC 61000-3-3
26
from -20 °C to 40 °C
Relative Humidity from 45% to 85%
Air pressure P: 500 hPa/1060 hPa
less than or equal to 2000 meters
Charging unit: Weight 108 g
93 x 93 x 40 mm
Handpiece: Weight 77 g
L 190 mm Max. Ø 21 mm
Compliance Electromagnetic Environment Guidance
the device uses RF energy only for its
internal function. therefore its RF emissions
Group 1
are very low and probably do not cause any
interference with nearby electronic devices.
Class B
The device is suitable for use in all
establishments, including domestic
Class A establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings used
Compliant
for domestic purposes.
a)