Mectron starlight uno Mode D'emploi Et D'entretien page 28

starlight uno
7.2 Cleaning and Sterilisation of the Optical Protection
7.2.1 Manual Cleaning
CAUTION: The only part of the device that can be sterilised is the optical protection.
7.2.1.1 Necessary Material
• Clean, soft cloths with low fiber-release;
• Enzymatic detergent at pH 6-9;
• Water;
• Container for immersion in the enzymatic liquid;
• Brush with soft nylon bristles.
CAUTION: Do not use sharp-edged objects to clean the optical protection.
7.2.1.2 Cleaning Method
1. Prepare an enzymatic detergent solution with pH 6-9, as per the instructions of the
manufacturer;
CAUTION: Once used, dispose of the enzymatic detergent correctly, do not recycle it.
2. Place the optical protection horizontally in a clean container and add enzymatic
detergent solution until the optical protection is covered completely;
3. Let the optical protection soak for 10 minutes at 40°C ±2°C;
4. During immersion in the enzymatic solution, delicately brush the surface of the optical
protection using the brush with soft nylon bristles to eliminate all traces of visible dirt;
5. Delicately brush the surface of the optical protection under running water using the
brush with soft nylon bristles.
CAUTION: Do not use as disinfecting agents:
• Very alkaline products (pH > 9);
• Products containing sodium hypochlorite;
• Products containing hydrogen peroxide;
• Products containing abrasive substances;
• Acetone;
• Methylethylketone.
as they can discolour and/or damage the plastic materials.
20