Description Des Codes D'anomalie (Dtc) De La Transmission Allison - PREVOST X3-45 2020 Manuel De L'opérateur

RPR - Return to Lorsque le test du capteur
Previous Range de rapport de vitesse ou
PS1 échoue, le module de
commande
transmission
retourne la transmission au
rapport
sélectionné.
NNC - Neutral S'il s'avérait que certains
No Clutches capteurs
échouent leurs tests de
conformité, le module de
commande
transmission (TCM) impose
le passage au point mort et
désactive l'embrayage.

DESCRIPTION DES CODES D'ANOMALIE (DTC) DE LA TRANSMISSION ALLISON 5

GÉNÉRATION
DTC
C1312 Retarder Request Sensor Failed Low
C1313 Retarder Request Sensor Failed High
P0122 Pedal Position Sensor Circuit Low Voltage
P0123 Pedal Position Sensor Circuit High Voltage
P0218 Transmission Fluid Over Temperature
P0562
System Voltage Low
P0602 TCM Not Programmed
P0604 Control module random access memory (RAM)
P0614 Torque Control Data Mismatch - ECM/TCM
P0634 TCM Internal Temperature Too High
P0642 Sensor Reference Voltage "A" Circuit Low
P0643
Sensor Reference Voltage "A" Circuit High
P0657 Actuator Supply Circuit Voltage 1 Open (HSD 1)
P0658 Actuator Supply Voltage 1 (HSD1) Low
P0659 Actuator Supply Voltage 1 (HSD1) High
P0703 Brake Switch Circuit Malfunction
P0708 Transmission Range Sensor Circuit High Input
P070C Transmission Fluid Level Sensor Circuit – Low Input
P070D Transmission Fluid Level Sensor Circuit – High Input
P0712 Transmission Fluid Temperature Sensor Circuit Low Input
Annexe C – Autres fonctions de la transmission Allison
de la
(TCM)
préalablement
de pression
de la
Description
DNA - Do Not Le
Adapt commandes
changement
adaptatives pendant que le
code est actif.
CHECK Inhibited Operation
Light
May inhibit retarder operation if not
No
using J1939 datalink
May inhibit retarder operation if not
No
using J1939 datalink
Use default throttle values. Freezes
No
shift adapts.
Use default throttle values. Freezes
No
shift adapts.
Yes Use default sump temp
No Inhibit TCC Operation, DNA
Yes Lock in Neutral
Yes Lock in Neutral
Allows operation only in reverse
Yes
and second range.
Yes SOL OFF (hydraulic default)
Yes Default sensor data used
Yes
Default sensor data used
SOL OFF, DNA, Inhibit TCC
Yes
operation, Inhibit main modulation
Yes DNS, SOL OFF (hydraulic default)
Yes DNS, SOL OFF (hydraulic default)
No Neutral to Drive shifts for refuse
packer. TCM inhibits retarder
No
operation if a TPS code is also
active.
Yes Ignore defective strip selector inputs
No None
No None
Yes Use default sump temp
9
TCM arrête les
de
de vitesse
IÈME
Description