Malaguti centro 125 ie Manuel D'entretien Et D'utilisation page 165

5.14.3 TAIL LAMP (WITH STOP LIGHT)
• Parking light (B‑Fig.38)
Bulb 12V - 5W (W5W)
• Stop light (S‑Fig.38)
Bulb 12V - 10W (R10W)
• Rear turn indicator (E‑Fig.38)
Bulb 12V - 10W (R10W)
Note: visually check if the stop light works properly,
by pulling one of the two brake levers.
V
E
P
W
S
B
All manuals and user guides at all-guides.com
REPLACING LAMPS
• Remove number plate light (see par.5.14.1).
• Remove cover of tail light (F‑Fig.38) by loosening the
• Remove the parabola (P‑Fig.38) by loosening the 2
Parking light (B‑Fig.39)
• Remove the lamp socket inside the lamp.
• Replace the light bulb.
• Refit the rubber lamp socket (by pressing) and the
Stop light (S‑Fig.40) and turn indicator (E‑Fig.40)
• Remove the coloured cap, secured to the lamp by
F
• Replace the light bulb.
• Refit the coloured cap and cover.
V
W
Fig.38
2 screws (V‑Fig.38). Pay attention not to scratch the
cover.
screws (W‑Fig.38).
cover.
means of two hooks.
When performing the operations described
above, pay attention not to damage parts nearby
(transmission, wiring, gaskets, etc.)
B
Fig.39
S
E
Fig.40
39

2
3
4
5
6
ENG