Malaguti centro 125 ie Manuel D'entretien Et D'utilisation page 129

3.3 TIRES
Type: Tubeless (without inner tube)
X Y
It is possible to use tires with load and speed
indexes that are higher than or identical to those
indicated.
It is however necessary for the speed indexes to
be identical for both tires.
USE ONLY HOMOLOGATED TIRES.
Check the tire conditions (before every journey): if they
are broken (cracked) or cut, have them replaced as
soon as possible.
"T.W.I." marks are provided all around the tire side
walls. These correspond to tire wear indicators, which
are situated in the tire's tread; if there is no difference
between the thickness of these indicators and the tread
depth itself, the tire must be replaced.
All manuals and user guides at all-guides.com
X
100/80‑16" 50P
Y
120/80‑16" 60P
Minimum tread depth (front and rear) is 2 mm
(Fig.6).
PRESSURE
bar
(psi)
X
2.0
(29.0)
Y 2.2
(3.9)
The pressure of tires must be adjusted while the
tire is at ambient temperature.
Pressure differing from that indicated can lead
to higher fuel consumption, irregular wear of the
tire, impaired vehicle performance and riding
conditions.
∆ T.W.I.
3
2 mm
Fig.6
+
2.0 2.
(29.0) (30.5)
2.3 2.3
(33.4) (33.4)
ENG
9

2
4
5
6