Ec Declaration Of Conformity; Ec Declaration Of Conformities - Evolution RAGE3-S Instructions D'origine

EC DECLARATiON OF CONFORMiTY

The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all
the relevant provisions of the Machinery Directive and other appropriate directives as detailed
below. The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC
Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive,
93/68/EC.
The CE Marking Directive.
2011/65/EU. The Restriction of the Use of certain
Hazardous Substances in Electrical Equipment (RoHS) Directive
2012/19/EU.
The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents
EN 61029-1: 2009+A11 • EN 61029-2-9: 2012+A11 • EN 55014-1: 2006+A1+A2 •
EN 55014-2: 1997+A1+A2 • EN 61000-3-2: 2014 • EN 61000-3-11: 2000 • EN ISO 12100:2010
The technical documentation required to demonstrate that the product meets the requirements of
directive has been compiled and is available for inspection by the relevant enforcement authorities,
and verifies that our technical file contains the documents listed above and that they are the correct
standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield S20 3FR
www.evolutionpowertools.com
Print: Matthew Gavins - Group Chief Executive
01/03/2016
38