Important Safeguards - Chef'sChoice EdgeCraft E1520 Manuel

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
Model E1520 in water or other liquid.
3. Make sure that only clean knife blades are inserted in
Model E1520.
4. Disconnect the appliance from its power source when not in use,
before cleaning, during service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You can return your sharpener to The Legacy
Company's factory for service where the cost of repair or
electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced
by the EdgeCraft® distributor or other qualified service to avoid
the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your EdgeCraft® distributor.
7. CAUTION! This appliance may be fitted with a polarized power
plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the
plug in anyway.
English — 2