MINN KOTA RAPTOR Mode D'emploi page 7

3
Raptor Raptor
Transom Transom
Edge Edge
4" 4"
Edge of Deploying Anchor Edge of Deploying Anchor
3. Transom to Raptor Clearance - The Raptor Mounting Bracket
included with your unit will allow for approximately 4" of
clearance or set back from the transom to the front edge of the
deploying anchor.
4. Raptor to Hull Clearance - The bottom edge of the Raptor
should never be less than 4" above the hull directly below the
Raptor to prevent spray and drag conditions.
5. Raptor to Engine Clearance - When selecting a mounting
location, make sure that no interference exists between the
Raptor and your engine during normal operation. Once you have
selected your mounting location, trim the engine all the way
up and all the way down, and steer the engine fully to the left
and right to confirm proper engine clearance. Ensure there is a
minimum of two to three inches of clearance from any point on
the Raptor in all states of stow and deploy.
If these conditions are not met, please consider using an optional
Minn Kota adapter bracket accessory. There are many adapter
brackets designed for the Raptor that allow for greater adjustability of the mount and allow for greater clearances to operate the Raptor.
Please visit minnkotamotors.com
Review the mounting considerations for the hydraulic pump and hose routing before installing the anchor to the boat.
©2020 Johnson Outdoors Marine Electronics, Inc.
4
Raptor Raptor
Bottom Edge Bottom Edge
of Raptor of Raptor
4" Minimum 4" Minimum
Hull directly
below Raptor
to learn more about selecting and installing an adapter bracket.
ANCHOR MOUNTING CONSIdERATIONS
4
5
Raptor Raptor
2" 2"
Minimum Minimum
2" 2"
Minimum Minimum
Outboard Motor
Range of Motion
Range of Range of
NOTICE:
In some instances, boat manufactures have
begun to make hollow boat Transoms. We recommend
speaking to your local boat dealer or OEM Manufacturer
for mounting recommendations.
Raptor Raptor
Bottom Edge Bottom Edge
of Raptor of Raptor
4" Minimum 4" Minimum
Hull directly below Raptor
2" 2"
Minimum Minimum
2" 2"
Minimum Minimum
Raptor Raptor
Motion Motion
minnkotamotors.com | 7
Raptor Raptor