MINN KOTA RAPTOR Mode D'emploi page 44

THE RAPTOR APP
Check the Application and Raptor Software Version on the App
When a Raptor is paired with a device, the Raptor app on the device records information about the paired Raptor(s), including the
software version installed on each. This information can be used to detect if a Raptor requires a software update. To check the software
version on paired Raptor(s), follow the steps below.
1
a. From the Raptor app Home screen, press the
Menu Button.
b. In the Menu Screen, find the Software Update option
and select it.
c. The Software Updates Screen will appear. The
Software List will show any Raptors that are paired
with the app and the Raptor App Software Version.
NOTICE:
Noting the version of the Raptor
and/or App, before and after updates, helps to
identify if the updates were successful.
NOTICE:
If the App cannot communicate
directly with the Raptor, the App will show the
version of software that it detected the last time
the device was paired and communicating with
the Raptor.
d. If there are no Raptors paired, the list will only show
information for the Raptor App. If Raptors are paired
and communicating, the name of each device will be
colored white. If the Raptors are paired but are not
communicating the Raptor name will be colored gray.
NOTICE:
If the Raptor App or Raptor software
needs an update, the App will list "UPDATE" next
to it. If the software is up-to-date, the App will
list "Up to Date".
44 | minnkotamotors.com
1a
1c
1b
©2020 Johnson Outdoors Marine Electronics, Inc.