MINN KOTA RAPTOR Mode D'emploi page 46

THE RAPTOR APP
Pairing a Device with Two Raptors
In order for the Raptor App to pair two Raptors to the device, the Raptors first need to be paired together. To learn how to pair two
Raptors together, read the "Pairing Two Raptors and Programming the Mounting Location" section of the Raptor Manual. Once the
Raptors are paired together, follow the directions for "Pairing a Device with a Single Raptor". Only one Raptor needs to be paired with
the device where the Raptor App is installed.
Forgetting a Raptor on a Device
Once a device is paired to a Raptor, it will remember the device, even if the device and the Raptor are not actively communicating.
In some cases, it may be necessary to clear the memory on the device and forget any paired Raptors. To do this, use the Bluetooth
settings on the device.
1
a. Open the Bluetooth settings on the device.
b. A list of paired devices will appear. The appearance
of the list from an Android to an iOS device will
look different.
c. On an Android device, select the Settings
next to the device in the list of Paired Devices. When
the next screen appears, find the option to Unpair
the device and select it.
d. On an iOS device, select the "i"
the device in the list of My Devices. When the next
Screen appears, find the option to Forget this Device
and select it.
e. Once the device is unpaired or forgotten, the device
is no longer paired or communicating with the device
and will not be visible to the Raptor App or device.
Raptor Control and Disable Auto-Lock
Most devices are programmed to Auto-Lock the device screen after a certain amount of time has lapsed where the device has been
inactive. In these cases, when the user had the Raptor app open to control the Raptor and returns to the device, the screen may be
locked. In order to control the Raptor, the device will first need to be unlocked to control the Raptor with the app. This Auto-Lock
feature can be disabled from the Raptor app in order to immediately control the Raptor after the device has been inactive. To turn Auto-
Lock "on", open the Raptor app and navigate to the Menu. Scroll to the bottom of the Menu and find the Disable Auto-Lock setting.
When the toggle is slid "on" and appears yellow, the Disable Auto-Lock is engaged and will prevent the device screen from locking when
the device experiences moments of inactivity. With this feature enabled, the device will immediately control the Raptor.
THIS COMPLETES THE INSTALLATION OF YOUR RAPTOR. A COMPLETE OWNER'S
MANUAL CAN BE dOWNLOAdEd AT MINNKOTAMOTORS.COM.
46 | minnkotamotors.com
Android
icon
icon next to
Android
iOS
iOS
©2020 Johnson Outdoors Marine Electronics, Inc.