MINN KOTA RAPTOR Mode D'emploi page 23

6
j. With the Hydraulic Hoses and Grommets installed, use
a second person to carefully lower the Raptor so that
the Spike is resting on the ground. Watch for pinch
points when lowering the anchor and make sure that
the anchor is clear from obstructions or persons before
lowering it to the ground.
CAUTION
Be sure that the Raptor is clear of obstructions and
persons while deploying or retracting. The spaces between
the Outer Arm, Inner Arm, Spike and brackets of the
Raptor can create a pinch point. Do not come in contact
with an area of the Raptor that may cause a pinch point
while it is moving in any direction to avoid the risk.
7
k. Return to the routed hoses and the Hydraulic
Fittings on the Pump Assembly. The Hydraulic
Fitting with the green Cap on the Manifold will
correspond to the UP/retract function. It will be
marked on the Manifold with "UP". The Hydraulic
Fitting with the black Cap on the Manifold will
correspond to the DOWN/deploy function. The
Hydraulic Fitting will be marked on the Manifold
with "DN". The Hydraulic Hose with the green Cap
will be matched to the Hydraulic Fitting with the
green Cap. The Hydraulic Hose with the black Cap
will be matched to the Hydraulic Fitting with the
black Cap.
Make sure that the Raptor anchor is deployed and the Spike is touching the ground if hydraulic pressure is not present. This includes
before the Pump Assembly is filled with hydraulic fluid and any time changes to the Hydraulic Circuit are made. Changes to the Hydraulic
Circuit may include adjustments to the Hydraulic Hoses, or adjustments to the bypass valves. Changes to pressure in the Hydraulic
Circuit may cause the Raptor to fall and pose a striking hazard due to gravity. Rest the Spike on the ground to avoid this hazard.
©2020 Johnson Outdoors Marine Electronics, Inc.
INSTALLING HYdRAULIC HOSES
6j
Outer Arm Outer Arm
7k
Green
Cap
Manifold
Green
Cap
UP/retract
Hydraulic
Fitting "UP"
CAUTION
Spike Spike
Inner Arm Inner Arm
Hydraulic
Hoses
Black
Cap
Pump
Assembly
Black
Cap
DOWN/deploy
Hydraulic
Fitting "DN"
minnkotamotors.com | 23