MINN KOTA RAPTOR PORT 4 Mode D'emploi

The Raptor Port 4" & 6" Jack Plate Bracket installs directly to the Jack Plate on the Port side of your boat.
Item /
Part # Description
Assembly
2351961 BRACKET, PORT 2/4 PAINTED
2
2351963 BRKT, PORT 2/4, PAINT WHT *white*
2351960 BRACKET, PORT 2/6 PAINTED
4
2351962 BRKT PORT 2/6, PAINT WHT *white*
2354911 INSTRC-INSTALL, JACKPLATE
s
SCREW-3/8-16X1.75 SET SSTL
6 2353411
*PRE-INSTALLED*
NUT-3/8-16, ACORN SS
8 2353103
*PRE-INSTALLED*
WASHER-3/8 HD FLAT SS
10 2371758
*PRE-INSTALLED*
RETAINER,STUD,ANCHOR BRKT
12 2352901
*PRE-INSTALLED*
A
2994939 BAG ASM,JACKPLATE HDW,RPTR
Items 14 - 22
14 2371757 WASHER-1/2", HEAVY DUTY, SS
16 2373108 NUT-1/2-13, NYLOC, SS
18 2373519 BOLT-1/2-13 X 3" HHCS SS
20 2353102 NUT-3/8-16 FLANGE,NYLOK,SS
22 2378608 ANTI SEIZE TUBE, 4CC
NOTICE:
The kit purchased will contain either Item #2 or Item #4 based on if a 4" (1810361 or 1810366 - white) or 6"
(1810363 or 1810368 - white) Port rise was selected. This kit is mounted directly to the Port side of a Jack Plate. It may also
be mounted directly to a Raptor Universal Sandwich Adapter (1810372 or 1810377 - white). The Raptor 3" Setback Bracket
(1810370 or 1810375 - white) may be added to these Jack Plate brackets for additional mounting options.
TOOLS AND RESOURCES REQUIRED
• Torque Wrench
• 1/2" Box End or Socket Wrench
MOUNTING CONSIDERATIONS
Before mounting your Raptor Jack Plate Bracket, please give consideration to the following:
1. The Jack Plate Bracket will only work with compatible Jack Plate designs and may not work with all Jack Plates. Please refer to the chart
below for compatible Jack Plate designs. Instructions follow by Jack Plate style in the order listed in the chart. If your Jack Plate is not
listed use of the Universal Sandwich Adapter (1810372 or 1810377 - white) either between the transom and Jack Plate, or between the
Jack Plate and Outboard will be necessary.
Manufacturer
TH Marine
R&R Designs
Bob's Machine Shop
1 | minnkotamotors.com
1810361, 1810366, 1810363 & 1810368
Qty.
1
1
1
1
1
4
4
4
A
1
1
This part is included in an assembly and cannot be ordered individually.
✖
4
Not shown on Parts Diagram.
s
2
2
4
1
• A second person to help with installation
Model
Atlas Hydraulic
Z-Lock Manual
Slidemaster Manual
Action Series
Standard Series
RAPTOR PORT 4" & 6"
JACK PLATE BRACKET
2
16
14
18
Offset
4" Thru 12"
6" Thru 12"
6" Thru 12"
6" Thru 14"
6" Thru 14"
©2020 Johnson Outdoors Marine Electronics, Inc.
4
20
22