MINN KOTA RAPTOR Mode D'emploi page 45

Pairing a Device with a Single Raptor
The Raptor App can be used to control the Raptor using a device
that is paired to the Raptor with a Bluetooth connection. Before
pairing the device with the Raptor, the Raptor App should first be
successfully downloaded. You can confirm that the app was successfully downloaded by opening it on your device. Once confirmed,
close the App to begin the pairing process.
1
a. On the device you intend to pair with the Raptor, turn
Bluetooth "on" and keep your device on that screen.
b. Press the Pair
located on the Raptor Pump Assembly. The PAIR/
Maintenance LED will begin to flash
Raptor will go into Pairing Mode for 30 seconds.
2
c. If on an Android device, select the Scan button to
begin the process on your device. On an iOS device,
as soon as the Bluetooth menu is opened, the scan
starts automatically. The Raptor will appear on the
list of available devices once it is recognized by
the device.
d. Select the Raptor from the list of available devices.
This will pair the Raptor to the device. Once you hear
the beeps, the Raptor is successfully paired.
NOTICE:
When the device Bluetooth is scanning
for the Raptor, the Raptor must be in Pairing Mode.
If the Raptor or the device time out, the process on
both will need to be re-initiated.
3
e. In order for the device and your Raptor to stay
connected, Bluetooth needs to remain "on". Once
the device is paired with the Raptor, the device
will connect and begin communicating with each
other. When the Raptor is paired to the device
and communicating with it, the Raptor App will
automatically recognize that the Raptor is paired.
f. If the pair is unsuccessful, repeat the process.
©2020 Johnson Outdoors Marine Electronics, Inc.
button on the Indicator Panel
blue. The
NOTICE:
Your device will only be able to connect to a
Raptor and be paired if the device is Bluetooth enabled.
Android
UP Button
1b
Mode LED
DOWN Button Pair/Maintenance LED
Android
Android
NOTICE:
When a device is paired with the Raptor, the
paired device and Raptor know each other. When a paired
device and a Raptor are connected they can actively
communicate with each other. In order for the Raptor
App to detect the Raptor, it needs to be paired and
communicating with the Raptor.
THE RAPTOR APP
iOS
PAIR/Maintenance
Button
Indicator
Panel
iOS
iOS
minnkotamotors.com | 45