Assembling The Equipment - Precor Discovery Série Manuel De L'utilisateur

Assembling the Equipment

CAUTION: Proper alignment and adjustment of the equipment is critical.
While tightening the fasteners, be sure to leave room for adjustments. Do
not fully tighten fasteners until instructed to do so.
Make sure the equipment is stable and placed on a solid surface. The
equipment is designed to be freestanding; however, it can be bolted to the
floor for extra stability. Precor highly recommends that the equipment be
bolted to the floor to reduce the risk of toppling the equipment due to
improper use. Since floor construction varies, please consult a professional
building engineer for proper fastening.
Seated Calf Extension Assembly Guide: Assembling the Equipment
The following figure shows the names used in this manual for the major
components of the equipment.
Figure 1: Seated Calf Extension components
3